Single Component Polyurea Floor Coating-DHK3600 Single component polyurea industrial floor anticorrosion waterproof coating takes high performance polyurea prepolymer resin as main film-forming materials. It endowed coating film properties of dense, tough, flexible and high performance of crack resistance, impact and wear resistance, anti-pressure and waterproof. The adhesive strength with concrete substrate could above 3Mpa.

One Component Concrete Special Polyurea Primer (Penetration Sealing) Primer has two major functions: first, infiltrate into substrate and steady the residual particles strengthen the base and avoid air and moisture penetration, and then second is to form a good supporting system with the following layers then increase the adhesive strength to the substrate. One component sealing primer has high permeability for into concrete surface, and then sealing it from the penetration effect, environment friendly and easy to apply, it has been widely applied on concrete substrate and improved the coating quality efficiently. Color Colorless and transparent Luster Glazed Density 1.05g/cm3 Volume solid content 76%±2% VOC ≤169g/L Recommended dry film thickness 30-60μm

Double-component waterproofing coating (DHK2000)belongs to solidify waterproof materials, and the Group A is isocyanate terminated pre-polymer polycondensated by polyether and isocyanate, Group B is colored liquid composed of plasticizer, curing agent, thickening agents, coagulant agent and filler, mix Group A and B evenly as rate and brush on the waterproofing substrate surface, form a elastics and rubber-like coating film through cross-linking and solididying at normal temperature, which plays a role of waterproofing

Q&A: 1. What is the substrate materials? or what is the roof materials? a. The substrate can be concrete surface, asphalt, bituminous felt. 2. What is the color you want? a. Any colour available 3. Do you have any requirements on environment? a. Yes, must be environment friendly. Possible to comply with CE standard. 4. We have both single and double component coating, which one do you prefer? a. Double coating; base coat and top coat. 5. Please also inform me of your operation craft, spray or brush ? a. Base coat by brush; Top coat by roller. 6. What is the average temperature there? a. +2 degree to 35 degree

It’s two components polyurethane system with high quality blend polyols and Isocyanate as main raw materials.To construct by high pressure spraying machines to make rigid foam.A component and B component by adding the fillings,catalyst to produce rigid foam which has excellent performances