Appearance : pale yellow flake
pH-value : 3-5 (5-10% solution)
Ionic nature : weak cationic            Cold water solution

1. Impart the fabrics soft, supple and fluffy hand feeling
2. Little affect on degree of whiteness and color shade
3. very cost-effective comparing with other flakes
4. has certain hydrophilicity

Suitable for woven and knitted fabric composed of cotton and linen and its blends with synthetic fiber, especial for denim fabric       

Cool Dilution:  30℃, proportion of 5-10% Warm Dilution: 60-70℃ proportion of 5-10% Dipping: 3～8%（o.w.f）(10% solution)      

Temperature：40～50℃
Bath ratio：1:10～15                                      

Time: 30min
  

Appearance: slight yellow flake
Ionicity: weak cationic
Ph Value: 4.0~6.5（1% aqueous solution）
Solubility: can be completely dissolved after 1 hours when dipped in 30 ℃ water with enough stirring.

1. softening finishing of woven and knitted fabric composed of cotton and linen and its blends with synthetic fiber, especial for denim fabric.                                                  2. Impart soft, supple and fat handle, has ideal antistatic effect
3. little affect on degree of whiteness and color shade.
4. compatible with nonionic or cationic auxiliaries in one bath

Application: Denim washing                                    Recommended dosage: 10% softener flake  DHK234   3-5% (o. w. f.)                                Cool dilution: pour flakes slowly into water (30℃) in proportion of 6-10%, stir it to split the flakes for 3-5 mins, leave it aside for 1-2 hrs. After observing the flakes are totally dissolved, restir the mixture to get an even paste.

Appearance : Yellowish or milky white flakes
PH-value : 7-9 at 8-10% solution
Ionic nature: nonionic
Dissolving procedure: dilute with water

1. provides a full, soft, flowing handle
2. May be combined with anionic and cationic products
3. an efective softener for kinds of fabrics
especially  for beaching, yarn, cock, sweater and knitwear
 

Pour the flakes slowly into room temperature water in proportion of 8-10%, stir and heat to 70-80℃ until the flakes melt and become a paste.
Padding process:                                                2-3 g/l, exhaust and pad at 30-40℃
Dipping process: 0.3-0.8% (o.w.f.)               bath ratio 1:10-15 for 15-30 mins 40-50℃

Appearance: White powder 

PH-value : PH value: 11.5-12.5(1% aqueous solution.)

Ionicity: Anionic 

1. used in Oxygen bleaching and one bath pretreatment of cellulose base fiber and their blends
2. In alkali condition, has very good alkali-resistant stabilization and buffering
3. Easy to wash and clean, saving water and power.
4. Good whiteness, even, mild, no harmful to fiber

The dosage depends on residual of peroxide oxygen

Appearance: White powder 

PH-value : PH value: 11.5-12.5(1% aqueous solution.)

Ionicity: Anionic 

1. can be used in Oxygen bleaching instead of caustic soda, and stabilizer, no need to use caustic soda to adjust PH again.
2. In alkali condition, it has very good alkali-resistant stabilization and buffering
3. Easy to wash and clean, saving water and power.
4. Good whiteness, even, mild, no harmful to fiber

mainly used for oxygen bleaching in pure cotton, flax, T/C fabrics. Oxygen bleaching process: 

DHK 206 3~4 g/l, Hydrogen peroxide 100% 3~5 g/l        

Steaming temperature: 100~102° C, Steaming time: 40~60 minutes.

Cold batch process: 

According to dosage of Hydrogen peroxide, normally about 60~70% of Hydrogen peroxide (100%)