Chemical Content: acrylic polymeric

Appearance ：Light yellow or Milky-white viscous liquid

PH-value : 6-7

Ionic nature : anion

Solid content : 45±1%

Dissolving procedure: dilute with water

1. print fine decorative pattern, the outline is very clear, suitable for the screen printing, roller and hand printing.       2. have no APEO, the content of heavy metal and formaldehyde meet the requirement of environmental protection.

3. have good rheological behavior 

4. can be used on the thickening for waterproof coating agent

Can add water to DHK8901 to make it as white paste and then put it into print paste. Also can mix DHK8901 with binder, coating paste and cross-linking agent, to stir in high speed about 3 to 5 minutes ready to be use.                   In non-ionized water, with dosage of 3 - 3.5%, the Viscosity of white paste is 80PA•S. The thickening ability is strong, paste-getting faster and unnecessary to add additional ammonia.

Appearance: Milk white viscous liquid 

Ionicity : Anionic 

Ph: 6.5-7.5 

Viscosity: 15-25cps 

Solid content: about 75% 

1. Specialized for pure cotton and man-made cotton reactive dyes printing.  

2.High hydrone cohesive force, good thickening ability.

3. Easy for operation 

4. Good stability, alkali resistance, better hand feeling than sodium alginate. 

5. APEO free, environment-friendly. 

Original paste formulation: 

Sodium Alginate: 12.5kg, Urea:  80-100kg   

DHK 8920: 18-20kg,

Anti back salt:  1kg 

Total: Add water till the total weight is 500kg 

Color paste formulation:

Original paste 60-70%,  reactive dyes water solution 20-30%

Soda 2%, Alkali 1%, Total: 100%   

Appearance: Milk white viscous liquid 

Ionicity : Anionic 

Ph: 6.5-7.5 

Viscosity: 15-25cps 

Solid content: about 45%

1. Specialized for pure cotton and man-made cotton reactive dyes printing.

2. High hydrone cohesive force, good thickening ability. 

3. Easy for operation 

4. Good stability, alkali resistance, better hand feeling than sodium alginate. 

5. APEO free, environment-friendly. 

Original paste formulation:

Sodium Alginate: 12.5kg, Urea:  80-100kg   

DHK 8921: 18-20kg,Anti back salt:  1kg 

Total: Add water till the total weight is 500kg

Color paste formulation: 

Original paste 60-70%, 

reactive dyes water solution 20-30%

Soda 2%, Alkali 1%, Total: 100%   

Appearance：light yellow sticky liquid

Iconicity：Anion

P H Value：6.5—7.5

Solid content：＞55%

1. If use DHK8955 replace sodium alginate, will make printing factory obtain remarkable economic benefits.               2. has a high cohesive force on water molecule, thickening effect is good. Because of its anion, can help disperse dyes to fiber dyeing, high dying ability.

3. paste is stability, even in Summer

Reference Formulation：

Water                               80 

Urea                               2～10

Soda or Baking Soda   2～3

Resist Salt                         1 

Disperse dyes             0.5～6

DHK8955                        2～5

Appearance : slightly thickness liquid

PH-value : 7-9

Ionic nature : Non-Ionic/Anion

Density: about 1.02g/cm3（20℃）

Boiling point: about 100℃

Solid content: 40±1%

Solubility: can be diluted with water by any ratio

1. Acrylic acid pigment printing binder is suitable for direct printing, resist printing, discharge printing and also foaming printing and pearl printing.

2. has a good dry cleaning fastness, soft hand feeling and excellent color fastness.

Aqueous paste prescription: 

xg          water              

25-30g Thickening agent

10-15g Compound emulsifying agent

80-180g DHK8973 

Total: 1000g 

General viscosity is: 

Aqueous paste: about 80 dPas

Low Kerosene paste: about 60-70 dPas